Signal list menu, Registering a signal to the list, Renaming a registered data – Panasonic TQBJ0349 User Manual

Page 71: Deleting a registered data, English, Registered signal status

Advertising
background image

ENGLISH -

71

Settings

See

z

“Navigating through the menu”

(

Æ

page 39).

See

z

“MAIN MENU” and “SUB MENU”

(

Æ

page 40).

J

REGISTERED SIGNAL STATUS

The name can be set for each sub memory.

z

MEMORY NO. : A1 (1-2)

z

Registering a signal to the list

When a new format input signal is applied to the

projector, press <MENU> button to register to the

SIGNAL LIST.

Note

You can register data up to 96 in total number of the

z

signal data and any corresponding sub memory data.

The memories are numbered over 12 pages (A to L: 8

z

data items can be registered on each page), and the

data is registered in the unused memory with the lowest

number. If all the memories are used, the data of the old

signals is overwritten in sequence.

The names of the registered data are automatically

z

determined by the input signals and memory numbers.

If a menu is being displayed, the new signals will be

z

registered at the instant they are input.

Renaming a registered data

Press ▲▼◄► to select the required

1 )

signal data.
Press <ENTER> button.

2 )

The [REGISTERED SIGNAL STATUS] screen

z

will be displayed.

Displays the character list.

z

Press <MENU> button to return to the

z

[REGISTERED SIGNAL LIST] screen.

Press <ENTER> button.

3 )

The [RENAME] screen will be displayed.

z

Press ▲▼◄► to select characters

4 )

and press <ENTER> button to input

them.
Press ▲▼◄► to select [OK], and

5 )

press <ENTER> button.

The [REGISTERED SIGNAL LIST] screen will

z

be displayed.

Press ▲▼◄► to select [CANCEL] and press

z

<ENTER> button to return to the [REGISTERED

SIGNAL LIST] without any change.

Deleting a registered data

Press ▲▼◄► to select the required

1 )

signal data.
Press <DEFAULT> button.

2 )

The [ENTRY SIGNAL CLEAR] screen will be

z

displayed.

Press <MENU> button to cancel and return to

z

the [REGISTERED SIGNAL LIST] without any

change.

Press <ENTER> button.

3 )

Displays [REGISTERED SIGNAL LIST] and

z

confirm the data is deleted.

Sub memory number

When the address number (A1, A2, …H7,

H8) signal is registered

SIGNAL LIST menu

Advertising
This manual is related to the following products: