Panasonic NV-VP60 Series - Manual (Page 21)

RQTV0115
21
Settings Using the On-Screen Display
VHS
Operations
21
.........................................................................................................................................................................................................................
[1] Press [ 34] to select “CH” and then press
[ 2 1] to select the channel.
.........................................................................................................................................................................................................................
[2] Press [ 34] to select “FINE” and then press
[ 2 1] to obtain the best tuning condition.
≥Press [ENTER] to return the tuning to its former state.
.........................................................................................................................................................................................................................
[3] Press [MENU] until the setting screen
disappears.
Set the Colour TV System.
.........................................................................................................................................................................................................................
[1] Press [ 34] to select
“AUTO”.
≥The VHS automatically
distinguishes between PAL,
SECAM/MESECAM and
NTSC signals. If the picture
lacks colour during AV
external recording,
playback or recording from
DVD to VHS, set to “PAL”, “MESECAM” or “NTSC”.
≥When you want to record or playback in black and white, set to
“B/W”.
.........................................................................................................................................................................................................................
[2] Press [MENU] repeatedly until the setting
screen disappears.
Press [ 34] to select the item and then press
[ 2 1] to change the setting.
¬ To exit the settings screen
Press [MENU] twice.
Fine Tuning
System
Option
SYSTEM
AUTO
PAL
MESECAM
NTSC
SELECT :
END : MENU
COPY I NG NORMAL AUDIO
SELECT : :
TAPE SELECT
OPT I ON
NTSC I NPUT SELECT
NTSC PB SELECT
OSD
Items
Settings (Underlined items are the initial setting.)
TAPE SELECT
Set the length of tape you are using so the unit can show the
correct remaining time (
l 22)
AUTO: E30, E60, E90, E120, E180 and E240 tapes
E195: E195 tapes
E260: E260 tapes
E300: E300 tapes
NTSC INPUT SELECT
Select the colour TV system used to record NTSC signals
AUTO:
NTSC [4.43] and [3.58] signals
≥If the tape has not recorded correctly, select 4.43 or 3.58.
4. 43:
NTSC 4.43 signals
3. 58: NTSC 3.58 signals
≥Some programmes on the NTSC 3.58 system cannot be
recorded.
NTSC PB SELECT
Select the colour TV system of the TV used to playback a tape
recording NTSC signals
onPALTV:
TVs that can receive PAL signals
4. 43: TVs that can receive NTSC 4.43 signals
3. 58: TVs that can receive NTSC 3.58 signals
OSD ( l 22)
AUTO: Messages appear on the TV for about 5 seconds
when you press [VHS STATUS].
OFF: Messages do not appear.
COPYING NORMAL AUDIO ( l 38)
Select the audio channel to be recorded on the Normal audio
track when copying a bilingual DVD
L:
To record the sound from left channel
R: To record the sound from right channel
VP60GCS.book Page 21 Monday, March 6, 2006 3:23 PM