Panasonic EB-X700 - Manual (Page 114)

111
View Session Log
To view the results of a selected server’s last configuration
session, from Connectivity application:
1. Open Dev Mgr.
2. Scroll to desired profile, press Options and select View log.
The log shows name of server configured, results of configuration,
date and time, and errors if any occurred during configuration.
SHORTCUT TO STOP CONFIGURATION
SESSIONS
There may be times in which you do not want configuration
sessions to run. Instead of going to each server profile to set
Active to not allow device management to be done by the server,
you can set the phone so that device management cannot be
done by any server.
The default setting is to allow device management to be done
(Enable configurations).
From Connectivity application:
1. Open Dev Mgr..
2. Press Options and select Disable config..
• All server profiles are disabled and no configurations can
be done.
To allow configurations to be done again, press Options and
select Enable config..