Poulan ES350WT - Manual (Page 14)

14
Inside view of
Bar Clamp
Adjusting
screw
Adjusting pin
Adjusting pin hole
8. Secure the guide bar and bar clamp
with the bar clamp nuts; tighten
finger tight only.
CAUTION: If saw chain is installed back-
wards, the saw will vibrate excessively
and will not cut wood.
CHAIN ADJUSTMENT
See CHECK CHAIN TENSION in the MAIN-
TENANCE section.
CUSTOMER SERVICEABLE PARTS
WARNING: Use of any other ac-
cessory or attachment might present a
risk of injury to the operator.
REPLACEMENT PART PART NO.
Hex Nuts 530015917
Oil Cap 530053072
Bar Adjusting Screw 530016265
Bar Adjusting Pin 530053068
File (5/32″ dia.) Twin Pak 952055085
Xtra GUARDr Chain --16″ 952051470
Lo--Kickr Guide Bar -- 16″ 952044759
Bar & Chain Lubricant --1 qt. 952030129
Bar & Chain Lubricant --1 gal. 952030130
STORAGE
WARNING: Perform the following
steps after each use:
S
Allow motor to cool before storing or
transporting.
S
Store chain saw and extension cord in
a well ventilated area
S
Store chain saw with all guards in
place and position chain saw so that
any sharp object cannot accidentally
cause injury.
S Store chain saw unplugged, well out of
the reach of children.
SEASONAL STORAGE
Prepare your unit for storage at the end of
the season or if it will not be used for 30
days or more.
If your chain saw is to be stored for a
period of time:
S
Clean it thoroughly before lengthy
storage.
S
Store in a clean dry area.
S
Lightly oil external metal surfaces and
guide bar.
S Oil the chain and wrap it in heavy
paper or cloth.