Plantronics DuoSet H141N - Manual (Page 7)

6
OVER-THE-HEAD CONFIGURATION
If already in place, remove the Pivot Ball Ring and
Earhook .
Press the Ear Cushion and Rubber Ring onto the Headset
Assembly . Align the notch in the ring with the Voice
Boom .
Snap the ball on the end of the Headband into the socket
on the rear of the Headset Assembly .
Place the Headband over the top of your head, with the
Ear Cushion resting gently against your ear and the T-Bar
positioned above the opposite ear.
If the headband is too tight or too loose, grasp the metal part
of headband and gently bend in the middle. The headband
length may be adjusted for fit and comfort
.
2
1
3
1
4
3
2
8
7
A
F
B
A
E
Duoset English 4.0 10/27/99 3:59 PM Page 13