Premier Mounts PSM-442F - Manual (Page 7)

7
Step 1
CAUTION : The plasma displays are fragile and heavy. At least two (2) qualified personnel are strongly recommended for the installation of this product.
Invert the plasma display and set it on a soft, flat surface to prevent any damage to the plasma display. See fig 1.
WARNING : Proper installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do so could
result in serious personal injury and possible damage to the plasma display.
Installing the mounting bracket
EXAMPLE PLASMA FOR ILLUSTRATION PURPOSES ONLY
Step 2
CAUTION: The plasma displays are fragile and heavy. At least two (2) qualified personnel are strongly recommended for the installation of this product.
Locate the mounting points found on the back of the plasma chassis, align the mounting holes from the mounting bracket to the holes on the chassis. Arrow found
on the PSM mount must always be pointing to the top of the plasma display before securing it to the chassis. Secure the mounting bracket to the plasma display by
using the hardware specified on the parts list. CAUTION: Do not over tighten the mounting hardware. See fig 2.
WARNING: Do not use the drill gun to secure the screws to the plasma display. A Phillips head screwdriver is preferred.
Soft and flat surface
blankets, foam, cloth
etc.
Inverted plasma
display
Top of the plasma
display
Bottom of the
plasma display
Inverted plasma
display
PSM-series
mount
Mounting hardware
(see chart on pg 5)