Panasonic TC-32LX300 - Manual (Page 7)

7
Installation
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the
screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video / Audio connection between components can be made with shielded video and audio cables. For best
performance, antenna cables should utilize 75 Ω coaxial shielded wire. Cables are available from your dealer or electronic
supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you’ll need.
For Optimum Quality Picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed clearly. Turn
off florescent lamps near the LCD and place in a location not exposed to outdoor light.
How to Hang the LCD TV on the Wall
Wall-mounting this LCD TV should be done with the following optional accessory only. Wall-mounting with any other type
of bracket may cause instability which could result in the possibility of damage or injury.
• Wall-hanging bracket ................................................ TY-WK32LX20W
Please consult a qualified technician to perform proper installation.
How to Use the LCD Stand
Adjust the stand to
the desired angle. The stand angle can be adjusted between 20 ° left and 20 ° right.
Cable cover Removal and Reinstallation
2
1
1
2
1
Opening Front Control Door
1. Insert the claws (at 3 points) at the
bottom.
2. Push the cover until hooks click into
place.
1. Push down hooks and pull the cover
slightly towards you to disengage the
claws (at 3 points).
2. Slowly pull out in the downward direction.
Removal Reinstallation
PULL
Raise the lower part of the door
labeled “PULL”.