Panasonic KX-PX2M - Manual (Page 64)

64
3 Cleaning thermal heads
If photo images are marred by
horizontal lines and you are not able
to print high-quality photo images,
use a commercially available cotton
swab, approximately 15 cm (6″) in
length, to clean the full length of the
thermal heads in the ink cassette
slot.
• Do not clean the thermal heads
immediately after printing.
• Disconnect the power cord and
remove the ink cassette before
cleaning the thermal heads.
• Do not insert your fingers in the
ink cassette slot while cleaning the
thermal heads as this may lead to
injury.
4 Printer driver
For operation details, see the help on the supplied CD-ROM.
Printing
Printer
Problem Cause and Remedy Page
The brightness and
color tones of the
preview image on
the LCD monitor is
different from the
ones of the printed
pictures.
• The preview image is not exact print image, just for your
reference. Therefore, there may be some differences
in the quality of the image on the LCD and the printed
image. This is not a malfunction.
—
The screen saver is
shown on the LCD
monitor. • This screen saver is displayed if the printer has not been
used for the time selected under [Sleep] on [Settings].
The screen saver is cleared by pressing any button.
1 The LCD monitor is automatically turned off a few
seconds after this screen saver is displayed.
—
Thermal heads
Bottom of the printer
Troubleshooting (continued)