Paradyne 3800PLUS - Manual (Page 148)

COMSPHERE 3800Plus Modems
13-14 October 1998 3980-A2-GB30-40
Table 13-1
(12 of 15)
3800 Plus AT Commands
AT Command Front Panel Branch Description
\Q n Flow Control of DTE, Flow Control of Modem
Flow Flow
Control Control of
of DTE Modem
\Q0 Disable Disable
\Q1 XON/XOFF XON/XOFF
\Q2 CTS to DTE Disable
\Q3 CTS to DTE RTS to Mdm
\Q4 XON/XOFF Disable
\Q5 Disable XON/XOFF
\Q6 Disable RTS to Mdm
Configure\Edit\
V42/MNP/Buffer
\T n No Data Disconnect Timer
\T0 Disable.
\T n Where n is a value from 1 to 255 in 1-minute increments.
Configure\Edit\
Line Dialer
\X n XON/XOFF Passthrough Flow Control
\X0 Disable.
\X1 Enable.
Configure\Edit\
V42/MNP/Buffer
%A n Error Control Fallback Character
%A n Where n is an ASCII value from 0 to 127. Factory default is
013 ASCII.
Configure\Edit\
V42/MNP/Buffer