Peripheral Electronics SIMPLE PGHGM3 - Manual (Page 9)

6
Tune Down
Turn the rotary tune knob to the left to manually tune down.
Seek Down
Press the “SEEK \/” button to seek down to next available station.
Changing Bands
To switch between AM and FM bands, press Preset #5 to toggle between
AM and FM modes.
Store Presets
To Store a station into the Preset memory, tune to the station, press Preset
#2 to enter the preset menu. Turn the tune knob to select the preset loca-
tion (1-18) where you wish to store the preset. When the preset position
is displayed (for example PRE1) press “SEEK \/” to store the preset into
memory.
The screen will display “PR SAVED” and your preset has been stored into
memory.
Recall Presets
To recall a preset saved in memory, press Preset #2 to enter the preset
menu. Turn the tune knob to scroll through the stored preset stations.
When the desired preset is displayed, press the “SEEK /\” button to select it.
Exit preset menu
To leave the preset menu simply wait 10 seconds. After 10 seconds of
inactivity the media gateway will automatically exit the menu.
Changing Display:
Press the “Disp” button to display artist and song information if the current
HD Radio station is transmitting that information.
Steering wheel controls
If the vehicle is equipped with Steering wheel controls, Press the “/\” button
to seek up to the next station. Press the “\/” button to seek down to the
next station.
8. Selecting AUX Input
Entering Mode Select Menu
Leave and re-enter the SAT mode to enter the mode select menu. This
can be accomplished by pressing the BAND button a few times until XM
is displayed on the screen. Once in the Mode Select Menu, turn the rotary
tune knob to scroll through available sources. Once “Aux 1” or “Aux 2” is
displayed, press Preset #2 to select the displayed mode.