Cleaning and maintenance, Pipe and plastic areas, Coated fabric on the back cushion caution – Panasonic EP1273 User Manual

Page 23

Advertising
background image

21

• Wipe these areas with a soft, dry cloth.

(Do NOT use cloths containing any kind of chemical, etc.)

• If the leather is particularly dirty, dampen with liquid soap

and brush the surface. Wipe with a cloth dampened with
water. Allow to dry naturally.
(Do NOT use a hair dryer to try to dry the surfaces more
quickly.)

• Do not allow these areas to come in contact with plastic for

extended periods of time as this may lead to discoloration.

• Please do NOT use thinners, benzine or alcohol.

LEATHER COVERING ON THE PILLOW, THE BACK CUSHION AND THE UNIT

CLEANING AND MAINTENANCE

Mild Detergent

Water

z Wipe the unit with a cloth that has been soaked

in a mild detergent and then thoroughly wrung
out.

x Next wipe the unit with a cloth that has been

moistened with just water and thoroughly wrung
out.

* Make sure you thoroughly wring out the cloth

first when cleaning the controller.

c Allow the unit to dry naturally.

• Please do NOT use thinners, benzine or alcohol.

Mild Detergent

Water

Thinners

Benzine

Alcohol

PIPE AND PLASTIC AREAS

z Wipe the seat fabric with a cloth that has been soaked in a

mild detergent solution and then thoroughly wrung out.

x Use a brush to apply a mild detergent to areas where the

coated fabric has become particularly soiled. Be careful not
to brush the fabric too much as this may damage it.

c Next wipe the fabric with a cloth that has moistened with

just water and then thoroughly wrung out.

v Allow the fabric to dry naturally.

• Please do NOT use thinners, benzine or alcohol.

Water

COATED FABRIC ON THE BACK CUSHION

CAUTION

• Always unplug the unit before cleaning it. Never touch a power plug with wet hands.

Failure to follow these instructions may lead to electrocution or burns.

Advertising