Panasonic KX-FPG391 - Manual (Page 91)

8. Programmable Features
89
– { 2}: Level 2
– { 3}: Level 3 (default)
– { 4}: Level 4
– { 5}: Level 5
– { 6}: Level 6
{ 0}{2} Key tone
– { 1}: “ On” (default)
– { 0}: “ Off”
{ 0}{3} Auto talk
– { 1}: “ On”
– { 0}: “ Off” (default)
{ 0}{4} Caller ID number auto edit
– { 1}: “ On” (default)
– { 0}: “ Off”
{ 0}{5}{1} Set dial mode
– { 1}: “ Pulse”
– { 2}: “ Tone” (default)
{ 0}{5}{2} Set flash time
– { 1}: “ 700ms” (default)
– { 2}: “ 600ms”
– { 3}: “ 400ms”
– { 4}: “ 300ms”
– { 5}: “ 250ms”
– { 6}: “ 110ms”
– { 7}: “ 100ms”
– { 8}: “ 90ms”
{ 0}{5}{3} Set line mode
– { 1}: “ A”
– { 2}: “ B” (default)
{ 0}{6}{1} Number of rings
– { 2}: “ 2”
– { 3}: “ 3” (default)
– { 4}: “ 4”
– { 5}: “ 5”
– { 6}: “ 6”
– { 7}: “ 7”
– { 0}: “ Toll saver”
{ 0}{6}{2} Recording time
– { 1}: “ 1min”
– { 2}: “ 2min”
– { 3}: “ 3min” (default)
– { 0}: “ Greeting only”
{ 0}{6}{3} Remote code
L Enter a 2-digit number (00-99). See page 85
for details.
{ 0}{6}{4} Recording mode
– { 1}: “ Standard recording 15min”
(default)
– { 2}: “ Enhanced recording 7min”
{ 0}{6}{5} Mailbox 2/Mailbox 3 password
L Select the desired mail box by pressing {e}
(“
Mailbox2”) or {v} (“Mailbox3”). See
page 85 for details.
{ 0}{8} Change language
– { 1}: “ English” (default)
– { 2}: “ Spanish”
{ 0}{9} Room monitor (handset)
– { 1}: “ On”
– { 0}: “ Off” (default)
{ 0}{#} Message alert
– { 1}: “ On”
– { 0}: “ Off” (default)
{ 0}{*}{1} Ringer tone (base unit)
– { 1}: “ Tone 1” (default)
– { 2}: “ Tone 2”
– { 3}: “ Tone 3”
– { 4}: “ Melody 1”
– { 5}: “ Melody 2”
– { 6}: “ Melody 3”
– { 7}: “ Melody 4”
– { 8}: Downloaded melody pattern 1
– { 9}: Downloaded melody pattern 2
{ 0}{*}{2} Incoming call tone (base unit)
– { 1}: “ On”
– { 2}: “ 2” (default)
– { 0}: “ Off”
{ 0}{*}{3} Room monitor (base unit)
– { 1}: “ On”
– { 0}: “ Off” (default)
{ 0}{0}{1} Handset registration
L Press {LOCATOR/INTERCOM} on the base
unit until “
HS REGISTRATION” is displayed.
See page 90 for details.
{ 0}{0}{2} Handset deregistration
L Press {3}{3}{5}.
See page 90 for details.
{ 0}{*}{4} Talking Caller ID (base unit)
– { 1}: “ On” (default)
– { 0}: “ Off”
FPG391_en.book Page 89 Friday, July 16, 2004 5:38 PM