Panasonic AJ-D910WA - Manual (Page 6)

– 6 –
Features
Automatic adjustment and memory functions for black balance/white balance
The black set, black balance and white balance can be automatically adjusted by simple switch
operations. Adjustment values are held in the memory even if the power for the unit is turned off,
so there is no need to readjust the balance each time the power is turned on.
There are two memory systems for white balance which can hold 3 adjustment values each for the
CC filter (cross filter is the same as 3200K.), making a total of 6 adjustment values. When adjust-
ment values matching the illumination conditions are selected from among the values stored in the
memory, the unit is automatically adjusted to the corresponding white balance. (A menu setting
also allows adjustment of only two values instead of the values for each filter.) In addition, when
the unit is shipped from the factory, the white balance value for 3200K is stored in the memory as
a preset value. This value can be called when there is no time to adjust the white balance, etc.
Character display function
The unit is equipped with a function that displays switch settings, the automatic adjustment status
for black balance and white balance, warning displays, etc. on the viewfinder screen.
In addition, when using an Anton Bauer Digital Magnum series battery as the unit’s power supply,
the remaining battery level can be displayed numerically on the viewfinder screen.
Warning system for displaying the VTR section status
The unit informs of VTR trouble, the end of the tape, battery wear, etc. with various warning lamps
and a warning tone. The remaining tape time can also be checked by the character display inside
the viewfinder.
4 · 2 filters as standard equipment
CC (color temperature conversion) and ND (neutral density) filters are provided as standard
equipment. The filter setting best suited to the brightness of the subject and lighting conditions can
be selected from among 16 different combinations.
Fine adjustment of the automatic iris reference value
The reference value for automatic iris adjustment can be finely adjusted by setting menu opera-
tions.
Auto close function
The unit is equipped with an auto close function which automatically closes the lens in the follow-
ing cases.
Á When the black balance is automatically adjusted.
Á When the power is turned off in the auto iris mode.
Generation of SMPTE/SNG color bar and reference audio signals
The camera section contains a circuit which generates an SMPTE type color bar signal to facili-
tate color monitor adjustments, and a circuit which generates a reference level audio signal to
facilitate audio level adjustments.
The unit also contains a circuit for generating SNG color bar signals which come in handy for
sending signals to communication satellites.
Functions and circuits for assuring high picture quality
The AJ-D910WA is equipped with the following functions (and circuits) in order to assure high
picture quality and is designed to make the fullest use of the advantages of the high-performance
CCD.
Á A built-in AUTO KNEE circuit achieves a wide dynamic range which allows large signals to pass
through.
Á A built-in 2-line image enhancer
Á
A built-in shading compensation function for use with a lens extender
Á
A built-in sawtooth wave generator for adjustments
Á A zebra pattern ON/OFF selector switch which selects three types of zebra patterns including
spot zebra from two levels of zebra patterns.