Polycom 3725-24004-001/A - Manual (Page 28)

User’s Guide for the Polycom PowerCam Presenter
2 - 16
To use a camera preset:
¾ Press Preset 1 or Preset 2 on the remote control to move the
camera to the position you stored for that preset.
If automatic camera tracking is on, it will turn off when you press
Preset 1 or Preset 2.
Obtaining System Information
The System Information screen provides you with specific details about your
Polycom PowerCam Presenter.
To obtain system information:
1. Press Menu on the remote control.
2. Select the System button at the bottom of the screen.
The System Information screen lists:
— System name
— Model
— Serial number
— IP address
— Software version
— MAC address
— Boot UI version
— Remote control battery weak indicator (if the battery is weak)
Tips on Using the Polycom PowerCam Presenter
Follow these tips to get the best results when using PowerCam Presenter:
• Do not use the locator pack when the batteries are weak. The System
Information screen shows a remote control battery weak indicator if the
batteries are weak. For information on how to recharge the batteries, refer
to Charging the Locator Pack Batteries on page 3-1 .