Polycom IPOWER 70 - Manual (Page 3)

3
About this
Booklet This booklet describes how to install the iPower
®
70 room camera.
The iPower 70 is a pan-tilt-zoom (PTZ) camera that is used with a
iPower collaboration system as a main or an auxiliary camera.
This booklet contains information on:
❑ Before you install (page 4)
❑ Unpacking the box (page 5)
❑ Important note (page 6)
❑ Attaching the camera to a monitor (page 7)
❑ Connecting the camera cable to the collaboration
system (page 8)
❑ Connecting an additional power cable (page 9)
❑ Service and support (page 10)
❑ Specifications (page 10)
Refer to the collaboration system documentation for instructions on
how to use this camera.
Installing the
iPower 70
Room Camera