Planar SD2020 - Manual (Page 15)

SD2020 | 10 | User's Guide
Monitor Specifications
Displays
Size 20.1” diagonal (510 mm)
Display type Active matrix color TFT LCD panel
Resolution 1600 x 1200 (UXGA)
Display dot 1600 x (RGB) x 1200
Display area (mm) 408 x 306 (H x V)
Pixel pitch 0.255 mm
Brightness (2D mode, mirror raised) 250 cd/m 2 (typical), 200 cd/m 2 (minimum)
Brightness (Stereo/3D Mode) 80 cd/m 2 (typical, through the glasses)
Contrast ratio (2D mode, mirror raised) 700:1 (typical)
Response time 25 ms (15 ms rise, 10 ms fall)
Response time (gray to gray) 16 ms (typical)
Display color palette 16.7 million colors
Refresh rate 49 – 75 Hz (60 Hz recommended)
Power requirements, input voltage Single phase, 100 – 240 VAC (50/60 Hz)
Power requirements, input current 1.2 A maximum per monitor
Power supply External
Power consumption 72 W (max) per monitor, 144 W total
(6 W total standby)
Product approvals UL/CUL, CSA, TUV-GS, VCCI, FCC-B, TOC '99
MTBF 50,000 hours at 25 ± 5°C
Video
Input signal Analog (VGA), Digital (24-pin DVI-D)
Input impedance 75 Ohm ± 2%
Sync input signal Digital TMDS, separate TTL compatible
horizontal and vertical synchronization
Polarity Positive, negative
Horizontal scan 24 – 80 kHz
Vertical refresh 49 – 75 Hz
Plug and Play
The unit supports the VESA DDC2B functions of Plug and Play.