Document Outline

• Contents
• About This Guide
  • Purpose and Intended Audience
  • Document Organization
  • Product-Related Documents
  • Conventions Used
• 1. About the FrameSaver SLV
  • System Overview
    • CSU/DSU-Specific Features
    • Router-Specific Features
  • FrameSaver Diagnostic and SLM Feature Sets
  • FrameSaver Diagnostic Feature Set
    • Additional FrameSaver SLV 9126-II and 9128-II Features
    • Additional FrameSaver SLV 9128-II Features
  • FrameSaver SLM Feature Set
  • OpenLane SLM System
  • NetScout Manager Plus and NetScout Probes
• 2. User Interface and Basic Operation
  • Logging On
  • Main Menu
  • Screen Work Areas
  • Navigating the Screens
    • Keyboard Keys
    • Function Keys
    • Selecting from a Menu
    • Switching Between Screen Areas
    • Selecting a Field
    • Entering Information
    • Screen Contents
  • Navigating the Router’s CLI
    • CLI Keyboard Keys
• 3. Configuration Procedures
  • Basic Configuration
    • Configuration Option Areas
    • Accessing and Displaying Configuration Options
    • Changing Configuration Options
    • Saving Configuration Options
• 4. Configuration Options
  • Using the Easy Install Feature
  • Using RIP with FrameSaver SLV CSU/DSUs
  • Entering System Information and Setting the System Clock
  • Setting Up the Modem
    • Setting Up Call Directories for Trap Dial-Out
    • Setting Up to Use the Modem PassThru Feature
  • Setting Up Auto-Configuration
    • Selecting a Frame Relay Discovery Mode
    • Automatically Removing a Circuit
  • Setting Up Dial Backup
    • Setting Up the DBM Physical Interface
    • Setting Up Automatic Backup Configuration
    • Modifying ISDN Link Profiles
    • Restricting Automatic Backup and Configuring Backup Timers
    • Configuring the DBM Interface to Send SNMP Traps
    • Assigning DLCIs to a Backup Group
  • PVC Backup Over the Network Interface
  • Setting Up Back-to-Back Operation
    • Changing Operating Mode
  • Configuration Option Tables
  • Configuring the Overall System
    • Configuring Frame Relay and LMI for the System (CSU/DSUs)
    • Configuring Class of Service Definitions
    • Code Point Definitions
    • Configuring Service Level Verification Options
    • Configuring General System Options
  • Configuring Physical Interfaces
    • Configuring the Network Interface
    • Configuring a User Data Port (CSU/DSUs)
    • Configuring the DSX-1 Interface
    • Configuring the ISDN DBM Interface
    • Setting Up ISDN Link Profiles
  • Assigning Time Slots/Cross Connections
    • Assigning Frame Relay Time Slots to the Network Interface
    • Assigning DSX-1 Time Slots to the Network Interface
    • Assigning a Synchronous Data Port to Network or DSX-1 Time Slots
    • Clearing Assignments
  • Configuring Frame Relay for an Interface
  • Manually Configuring DLCI Records
  • Configuring PVC Connections
  • Configuring the IP Path List
  • Setting Up Management and Communication Options
    • Configuring Node IP Information
    • Configuring Management PVCs
    • Configuring General SNMP Management
    • Configuring Telnet and/or FTP Session Support
    • Configuring SNMP NMS Security
    • Configuring SNMP Traps and Trap Dial-Out
    • Configuring Ethernet Management
    • Configuring the Communication Port
    • Configuring the Modem Port
  • Configuring the Criteria for Automatic Backup
• 5. Configuring the FrameSaver SLV Router
  • FrameSaver SLV Router Overview
  • IP Routing
  • Address Resolution Protocol
  • Proxy ARP
  • Interface Configuration
  • Network Address Translation
    • IP Options Processing
    • Applications Supported by NAT
    • NAT Configuration Example
  • Network Address Port Translation
    • NAPT Configuration Example
    • NAT and NAPT Configuration Example
  • Dynamic Host Configuration Protocol Server
    • DHCP Server with NAT Configuration Example
    • DHCP Server at Remote Site Configuration Example
  • DHCP Relay Agent
  • Router Security
    • IP Router Filtering
    • Bridge Filtering
    • IP Filtering
    • Land Bug Prevention
    • Smurf Attack Prevention
  • Provisioning the Router Interface
  • Configuring the Router Using Terminal Emulation
    • Uploading and Downloading the Router Configuration Via the CLI
• 6. Security and Logins
  • Limiting Access
  • Controlling Asynchronous Terminal Access
  • Limiting Dial-In Access via the Modem Port
  • Controlling ISDN Access
    • ISDN Call Security
    • Disabling ISDN Access
  • Controlling Telnet or FTP Access
    • Limiting Telnet Access
    • Limiting FTP Access
    • Limiting Telnet or FTP Access Over the TS Access Management Link
  • Controlling SNMP Access
    • Disabling SNMP Access
    • Assigning SNMP Community Names and Access Levels
    • Limiting SNMP Access Through IP Addresses
  • Creating a Login
  • Modifying a Login
  • Deleting a Login
  • Controlling Router CLI Access
    • Access Levels (Command Modes)
    • Changing Access Levels
• 7. Operation and Maintenance
  • Displaying System Information
  • Viewing LEDs and Control Leads
    • FrameSaver SLV 9126 LEDs and Control Leads
    • FrameSaver SLV 9128-II LEDs and Control Leads
    • LED Descriptions
    • Control Lead Descriptions
  • Device Messages
  • Status Information
    • System and Test Status Messages
    • Network LMI-Reported DLCIs Status
    • IP Path Connection Status
    • PVC Connection Status
    • Time Slot Assignment Status
    • DBM Interface Status
  • IP Routing Table
  • Performance Statistics
    • Clearing Performance Statistics
    • Service Level Verification Performance Statistics
    • DLCI Performance Statistics
    • Additional Performance Statistics for IP Enabled DLCI
    • Frame Relay Performance Statistics
    • ESF Line Performance Statistics
    • DBM Call Performance Statistics
    • Ethernet Performance Statistics
  • Trap Event Log
  • Modem Operation
    • Activating the Modem PassThru Feature
    • Canceling Modem PassThru Operation
    • Manually Disconnecting the Modem
    • Verifying Modem Operation
  • ISDN DBM Operation
    • Forcing Backup (Disruptive)
    • Placing a Test Call (Nondisruptive)
    • Verifying ISDN Lines
    • Verifying That Backup Can Take Place
  • FTP File Transfers
    • Upgrading System Software
    • Upgrading ISDN BRI DBM Software
    • Determining Whether a Download Is Completed
    • Changing Software
    • Transferring Collected Data
  • Turning Off the System Alarm Relay
• 8. Troubleshooting
  • Problem Indicators
  • Resetting the Unit and Restoring Communication
    • Resetting the Unit from the Control Menu
    • Resetting the Unit By Cycling the Power
    • Restoring Communication with an Improperly Configured Unit
  • Troubleshooting Management Link Feature
  • LMI Packet Capture Utility Feature
    • Viewing Captured Packets from the Menu-Driven User Interface
  • Alarms
  • Viewing the Trap Event Log
  • Troubleshooting Tables
    • Device Problems
    • Frame Relay PVC Problems
    • ISDN DBM Problems
  • Tests Available
    • Test Timeout Feature
    • DBM Tests
  • Starting and Stopping a Test
    • Aborting All Tests
  • PVC Tests
    • PVC Loopback
    • Send Pattern
    • Monitor Pattern
    • Connectivity
    • Test Call
  • Physical Tests
    • Line Loopback
    • Payload Loopback
    • Repeater Loopback
    • DTE Loopback
    • Send Line Loopback
    • Data Channel Loopbacks on a Frame Relay Link
    • Send Remote Line Loopback
    • Send and Monitor Pattern Tests
  • IP Ping Test
    • IP Ping Test – Procedure 1
    • IP Ping Test – Procedure 2
  • Lamp Test
• 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
  • OpenLane Support of FrameSaver Devices
  • Setting Up the OpenLane SLM System
  • Setting Up FrameSaver Support
  • Ordering SLM Feature Set Activations
    • To Find Your License Key Number
    • The Activation Certificate
  • Administering and Managing SLM Activations
    • Entering an Activation Certificate
    • Checking Activation Certificate Status
    • Scheduling Activations
    • Checking the Status of Scheduled Activations
    • Canceling Scheduled Activations
    • Accessing and Printing the Certificate Summary Report
• 10. Setting Up NetScout Manager Plus for FrameSaver Devices
  • Preparation
  • Configuring NetScout Manager Plus
    • Adding FrameSaver SLV Units to the NetScout Manager Plus Network
    • Verifying Domains and Groups
    • Correcting Domains and Groups
    • Adding SLV Alarms Using a Template
    • Editing Alarms
    • Adding SLV Alarms Manually
    • Creating History Files
    • Installing the User-Defined History Files
  • Monitoring a DLCI’s History Data
  • Monitoring the Agent Using NetScout Manager Plus
  • Statistical Windows Supported
• 11. Setting Up Network Health for FrameSaver Devices
  • Installation and Setup of Network Health
  • Discovering FrameSaver Elements
  • Configuring the Discovered Elements
  • Grouping Elements for Reports
  • Generating Reports for a Group
    • About Service Level Reports
    • About At-a-Glance Reports
    • About Trend Reports
    • Printed Reports
  • Reports Applicable to SLV Devices
• A. Menu Hierarchy
  • Menus
• B. SNMP MIBs and Traps, and RMON Alarm Defaults
  • MIB Support
  • Downloading MIBs and SNMP Traps
  • System Group (mib-2)
    • FrameSaver Unit’s sysDescr (system 1)
    • FrameSaver Unit’s sysObjectID (system 2)
  • Interfaces Group (mib-2)
    • Paradyne Indexes to the Interface Table (ifTable)
    • NetScout Indexes to the Interface Table (ifTable)
  • Standards Compliance for SNMP Traps
    • Trap: warmStart
    • Trap: authenticationFailure
    • Traps: linkUp and linkDown
    • Traps: enterprise-Specific
    • Traps: RMON-Specific
    • Trap: dialControl
  • RMON Alarm and Event Defaults
    • Physical Interface Alarm Defaults
    • Frame Relay Link Alarm Defaults
    • DLCI Alarm Defaults – Paradyne Area
    • DLCI Alarm Defaults – NetScout Area
  • Object ID Cross-References (Numeric Order)
• C. Router CLI Commands, Codes, and Designations
  • CLI Commands
    • Pager Command
    • Access Control Commands
    • Configuration Commands
    • Interface Commands
    • IP Routing Commands
    • Bridge Commands
    • ARP Commands
    • NAT Commands
    • DHCP Server Commands
    • DHCP Relay Agent Commands
    • Filter (access-list) Commands
    • Diagnostic Commands
    • Show Commands
  • Ethernet Type Codes
  • Protocol and Port Designations
    • ICMP Designations
    • TCP Port Designations
    • UDP Port Designations
• D. Router Command Line Summaries and Shortcuts
  • CLI Summaries
    • Show Command Summary
    • Access Control and System Level Command Summary
    • CLI Command Summary
    • CLI Command Default Settings
• E. Connectors, Cables, and Pin Assignments
  • Rear Panels
  • COM Port Connector
    • COM Port for 9126 and 9128-II (25-Position)
    • COM Port for 9126-II (9-Position)
    • COM Port for 9128-II Carrier Mount
    • COM Port-to-PC Cable (Feature No. 3100-F2-550)
    • COM Port-to-Terminal/Printer Cable (Feature No. 3100-F2-540)
    • COM Port-to-Router Cables
    • Gender Adapter/Changer
    • LAN Adapter Converter and Cable
  • DTE Port Connector
    • Standard V.35 Straight-through Cable
    • Standard V.35 Crossover Cable
  • DSX-1 Connector
    • DSX-1 Port for 9126, 9126-II, and Carrier Mounted 9128-II (8-Position)
    • DSX-1 Adapter (Feature No. 9008-F1-560)
    • DSX-1 Port for 1-Slot 9128-II (15-Position)
  • T1 Network Cable (Feature No. 3100-F1-500)
    • T1 Mass Termination Cable (Feature No. 9007-F1-500)
    • Canadian T1 Line Interface Cable (Feature No. 3100-F1-510)
  • Ethernet Port Connector
  • Modem Connector
  • ISDN DBM Connector
    • ISDN Modular Cable
• F. Technical Specifications
• G. Equipment List
  • Equipment
  • Cables
• Index
  • Numerics
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • Y