Pioneer DVR-330-S - Manual (Page 39)

Recording 05
39
En
Editing a timer program
You can change any of the settings in a timer program
before the recording is due to start.
1 Press TIMER REC.
2 Highlight the timer program you want to
change ....
3 Press then select ‘Modify’ from the command
menu panel.
Alternatively, press ENTER .
The Timer Program Set screen appears from which you
can edit the settings.
4 Edit the timer recording settings as necessary.
5 Select ‘Store Program’ to finish.
Confirm the settings you made from the following screen.
Deleting a timer program
You can delete timer programs you no longer need.
1 Press TIMER REC.
2 Highlight the timer program you want to erase ....
3 Press then select ‘Erase’ from the command
menu panel.
• Select Yes to confirm or No to cancel.
• You can also just press CLEAR when the timer
program is highlighted.
Skipping a regular timer program
If you’ve set a regular daily or weekly timer program, you
can set the recorder to skip the next scheduled
recording.
1 Press TIMER REC.
2 Highlight the timer program you want to skip ....
3 Press then select ‘Cancel Once’ from the
command menu panel.
• In the timer program list, Cancel Once appears by
the program.
• You can also just press when the timer program is
highlighted.
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
Moving the end time by 30-minute blocks
1 During timer recording, press and hold ì REC for
three seconds.
The timer indicator disappears from the front panel
display.
2 Press ì REC repeatedly to extend recording in 30
minute increments.
Programming a new end time
You can edit the end time of a timer recording you have
previously set.
1 Press TIMER REC.
2 Highlight the timer program you want to
change.
3 Press then select ‘Modify’ from the command
menu panel.
Alternatively, press ENTER .
The Timer Program Set screen appears from which you
can edit the settings.
4 Edit the end time as necessary.
You can also edit the Extend time parameter.
5 Select ‘Store Program’ then press ENTER.
6 To exit the timer recording screen, press HOME
MENU.
HOME
MENU
ENTER
PREV NEXT
TIMER REC
DVR-330_RL.book 39 ページ ２００５年３月１日 火曜日 午後１０時４７分