Panasonic WV-7110A - Manual (Page 7)

-7-
a-3. Be sure to stick the Angle Seat(supplied) onto the
Angle-A.
Caution: When the left and right pan limit screws
should be removed from the pan/tilt unit due to the
Angle-A installation, use the Angle Seat as shown
below.
b.Mounting of the Angle-B(supplied)
b-1. Remove the mounting adaptor of the camera by
removing the two mounting adaptor fixing screws.
b-2. Fix the Angle-B onto the camera by using the two
Angle Fixing Screws(supplied) as shown in the
following.
Angle seat (supplied)
Cut here when using
the Angle-A (normal) Cut here when using
the Angle-A (180
°
reversal)
Mounting Adaptor
Angle-B (supplied)
Angle Fixing Screws (supplied)