Polaroid PV330 - Manual (Page 42)

38 English
Maintaining the Projector
Back Filter To clean the back filter:
1 Remove the three retaining screws located on the back of the projector.
Figure 32: Replacing the Back Filter
2 Lift and remove the rear filter cover.
3 Remove the foam filter from the filter cover.
4 Clean the foam filter with soap and water, rinse, and dry thoroughly.
5 Replace the filter in the filter cover and reinstall it in the projector.
Bottom Filter To clean the bottom filter:
1 Remove the four retaining screws located on the bottom of the
projector.
Figure 33: Replacing the Bottom Filter
2 Remove the bottom filter cover.
3 Use a vacuum cleaner to remove dust from the exposed filter.
4 Replace the bottom filter cover.
Retaining
screws
Rear filter cover
Bottom filter cover
Retaining
screws
Retaining
screws