Planar CM17.4SXAD - Manual (Page 27)

Installing the Display | 15
VS17.4SXAD / CM17.4SXAD ( 020-0168-00B )
S-Video and Composite Video Settings
These functions are active on the VitalScreen onscreen display when
the display is in S-Video or Composite Video mode.
This option is available only on the VitalScreen 17.4" CSR display.
Settings
The settings are selected with the Function buttons. Select the UP ( ) or
DOWN ( ) arrow.
Change the settings with the Adjustment buttons. Select the PLUS ( ) or
MINUS ( ) control.
Contrast Adjust the contrast level of the display
Brightness Adjust the brightness of the display’s backlight
Volume Adjust audio volume
Input Switch between S-Video and Composite Video modes
Video → VGA Switch between video and VGA/DVI inputs
Hue Adjust the hue level of the display
Sampling Change Sampling mode settings
Overscan Turn Overscan ON or OFF
Reset Reset display S-Video or Composite Video settings
Quick adjustment functions
For this function… Push this key…
Input Adjust MINUS ( ) twice
Audio volume Adjust PLUS ( )
Video → VGA Power/Menu key,
1
then push Adjust PLUS ( ) or
Adjust MINUS ( )
1
Pressing and holding the Power/Menu button for more than 2 seconds turns off
the display.