Philips FW-V39 - Manual (Page 10)

3139 116 19982
10
English ¡ n
–
to connect headphones.
™ CLOCK•TIMER
–
to view the clock, set the clock or set
the timer.
£ RETURN
–
for VCD with PBC on to return to the
previous MENU level during playback
(for VCD version 2.0 only).
≤ PBC (PLAYBACK CONTROL)
–
to switch on or off PBC mode (for VCD
version 2.0 only).
∞ A. REPLAY (AUTO REPLAY)
–
to select playback mode either in
continuous AUTO REPLAY or ONCE
only.
§ DUBBING
–
to dub a tape in normal speed.
≥ TAPE DECK 2
• TAPE DECK 1
ª OSD (ON SCREEN DISPLAY)
–
to switch on or off the on screen
display on the TV screen.
º ZOOM
–
to enlarge a still picture on the TV
screen
(for VCD operation only).
⁄ VOCAL
–
to fade out the vocal of the original
song during VCD playback or to switch
between mono or stereo mode during
audio disc playback
(for VCD operation
only).
¤ KEY CONTROL ( I È i )
–
to change the key to suit your vocal
range
(for VCD operation only).
I ................. to decrease vocal key
level.
È .................... to restore vocal key to
original setting.
i ................... to increase vocal key
level.
‹ ECHO -/+
–
to adjust the echo level for karaoke
(for VCD operation only).
› RESUME
–
to continue playback again from
where you have stopped. Only when
PBC mode is switched off
(for VCD
operation only).
fi SLOW
–
to watch a VCD at a slower speed.
There are 3 modes of selection
(for
VCD operation only).
fl A - B
–
to playback a certain scene or passage
of a VCD/CD repeatedly.
‡ DIGEST
–
to scan through a VCD or a particular
track. There are 4 modes of selection
(for VCD operation only).
° REPEAT
–
to repeat a disc track or the current
disc.
· DIGIT 0 – 9
(numbers consisting more than two
figures must be keyed in within 2
seconds.)
for VCD with PBC on ..........................
to select an entry level.
for VCD/CD/MP3-CD…to key in a disc
track to start playback
or
...................... to select another track
during playback or
...................... to select a track for
programming.
‚ B
–
to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to
control by pressing one of the
source select keys on the remote
control (e.g. VCD, TUNER, etc.).
– Then select the desired function
(Й, н, л, etc.).
CONTROLS
pg 01-28/V39/21-En 6/8/01, 9:01 AM 10