Pioneer M-F10 - Manual (Page 18)

18
5 More CD Features
Programming the track
order
This mode lets you program a sequence (a playlist) of up to
24 tracks to play. The order can be anything you choose.
Tracks can appear more than once in the playlist, or can be
left out entirely. The playlist applies only to the disc in the
player at the time. Once you take the disc out (or switch the
power into standby), the playlist is lost.
DIRECT PLAY 3
SYSTEM
SET
CANCEL MENU
7
4 ¢
CD
1 If the system isn’t already in CD mode, press
CD then stop playback.
2 With the disc stopped, press SYSTEM MENU,
then SET.
3 Use
4 or ¢ to select PROGRAM, then
press SET.
4 Select a track to add to the playlist using the
4 and ¢ buttons.
For example, to add track 3, press
¢ three times. Or, to add
the last but one track, press
4 twice.
The currently selected track blinks.
PGM
5 Press SET to add the track to the playlist.
The display briefly shows the playlist step number and the
track.
PGM
6 Repeat steps 4 and 5 to continue adding
tracks to the playlist.
• If you make a mistake, press
CANCEL to delete the last
(most recent) track programmed. (Delete multiple tracks
by pressing
CANCEL repeatedly.)
PGM
• When no more tracks can be added the display shows
CD PGM FULL .
PGM
7 When you've completed the playlist, press
MENU.
The playlist can be up to 24 tracks long.
8 Press CD to start playback.
Checking the playlist order
You can only check the playlist order when the disc is stopped.
Once stopped, you can step through the playlist using the
4 and ¢ buttons.
Each track number in the playlist is
displayed.
If you then press
7
, the total playing time of the playlist is
displayed.
Deleting the playlist
If you want to delete the playlist without removing the disc,
press
7
STOP twice when the disc is stopped.