Panasonic CQ-C7300N - Manual (Page 13)

25
English
CD Player
Cautions:
¡ This unit does not support 8 cm discs.
¡ Do not use irregularly shaped discs.
¡ Do not use discs that have a seal or label attached.
¡ To avoid damaging the front panel, do not push it down or
place objects on it while it is open.
¡ Do not pinch your finger or hand in the front panel.
¡ Do not insert foreign objects into the disc slots.
¡ Refer to the section on “Notes on CD/CD Media” (
a Page
37).
¡ A disc which has both CD-DA data and MP3/WMA data on it
may not be reproduced normally. (For example, it may be
reproduced without sound.)
Play Mode Selection
One-touch operation is available for selecting a track
playing style by use of [RAND] (Random) or [REP]
(Repeat).
RANDOM
Press [RAND] (Random).
Press again to cancel.
REPEAT
Press [REP] (Repeat).
Press again to cancel.
SCAN play
You can find your favorite track by playing first 10-sec. of
each track.
Press [SCAN].
Press again to cancel.
Direct Access
A track can be directly selected.
Example: track number 5
1 Press [#] (NUMBER).
2 Press [5].
3 Press [SET].
Note: To suspend direct selection, press [DISP]
(Display).
Random and Repeat play can be set.
1
Press [MENU] to open the menu.
( a page 16)
For using the remote control, hold down [MENU]
for 2 sec. or more.
2 Press [MENU] to select a mode to be
adjusted.
The selection/adjustment screen appears 1 sec. after
mode selection.
3 Press [BAND] (SET) to adjust the set-
ting value.
4 Press [DISP] to return to the regular
mode.
Note: If no operation takes place for more than 10 sec-
onds, the display returns to Regular Mode.
RANDOM
Random playback ( lights.)
REPEAT
Playing the current track repeatedly ( lights.)
Play Mode Selection (CD menu display)
(RANDOM, REPEAT)
Functions Only by
Remote Control Unit
24
CD Player
1
Press [ ] (OPEN) to open the front
panel.
When a disc is already loaded, the disc will automati-
cally be ejected.
2
Load a disc with the label-side facing up.
The front panel closes automatically, and the unit
recognizes the disc and starts playing automatically,
too.
When a disc is already loaded, press [SOURCE] to
select the CD mode.
Note: The power is turned on automatically when
inserting a disc at ACC on.
3
Select a desired portion.
Track selection
[7] (TRACK): Next track
[6] (TRACK): Preceding track (press twice.)
Note: Press and hold for fast forward/reverse.
Pause
Press [BAND] (h / 5).
Press again to cancel.
CQ-C7300N
BAND
Track
Play time
Play Mode indicators
Display change
Press [DISP] (Display) to change.
Disc Title
Track Title
CT
Display off
Normal
Operation Flow
CD Mode Display
Notes:
¡ For scrolling text, hold down [BAND] for 2 sec. or
more.
¡ If the number of displayed characters is 8 or less, the
characters do not scroll.
¡ “NO TEXT” is displayed when there is no information
on the disc.