Basic functions, Selecting the source, Volume control – Philips MX5000/37 User Manual

Page 17: Adjusting the tone, Dimming the display screen, Selecting the surround sound mode

Advertising
background image

15

English

Selecting the source

● Adjust the SOURCE button (or press DVD/CD, TV/AV,

TUNER, CDR, AUX, SAT or VCR) to select the input
source.
➜ The selected source will be displayed.

Volume control

Adjust

VOLUME button (or press +/-) to increase or

decrease the volume level.

To use the volume control to adjust Philips TV’s volume
level, press

TV on the remote control to select TV mode

first.

To listen through the headphones

● Connect the headphones plug to the PHONES socket at

the front of the player.
➜ The speakers will be muted.

To switch off the volume temporarily

● Press MUTE.

➜ “MUTE” icon appears.

● To restore the volume, press MUTE again.

Adjusting the tone

The tone controls only affect the front left and right
speakers.

1

Press

TONE repeatedly to select Bass or Treble

adjustment.

2

While in Bass or Treble adjustment mode, adjust

VOLUME

knob to adjust the selected Bass or Treble level.

Note:
– If no button is pressed within a few seconds, the player will
exit the tone mode automatically.

Dimming the display screen

● Press DIM to switch the dim mode on or off.

Selecting the surround sound
mode

IMPORTANT!
– For proper surround sound, make sure you have
followed the “Connections” and “Preparations”
procedure fully.
– The center and surround speakers only operate
when the unit is set to a surround sound mode
and the source material being played is recorded
or broadcast in Dolby Digital, DTS or Dolby Pro
Logic surround sound.
– Stereo broadcasts or recordings will produce
some surround channel effects when played in a
surround mode. However, monaural sources will
not produce any sound from the surround
speakers.

● Press SURROUND ON/OFF repeatedly to select

surround or stereo mode.
➜ The availability of the various surround sound modes
depend on the number of speakers used and the incoming
sound information available on the disc. The available output
modes are shown below.

Dolby Digital Surround
Dolby Digital (also known as AC-3 or Dolby 5.1) and
MPEG Multichannel delivers a realistic and dynamic sound
similar to theater and cinema. It requires connection of all
five speakers (front left/right, center, surround left/right) and
subwoofer for correct Dolby Digital Surround sound
reproduction. Each channel plays its own unique role in
providing the right sound. Front left, center and right join
two surround speakers to reproduce high, mid and bass
frequencies in five full-range channels of surround. Bass
rumble, explosions and low frequency effects you feel are
delivered through the subwoofer. A large number of DVD
discs have been recorded in Dolby Digital Surround.

DTS Surround
The DTS Surround is a cinema surround sound format that
offers superior digital audio performance. DTS offers more
clarity and definition especially for higher tones. The better
sound quality is a result of the limited sound compression
(3:1 instead of 11:1 for Dolby Digital) and the 20-bit
resolution.

Dolby Pro Logic Surround
The Dolby Pro Logic Surround system is a specially
encoded two-channel analog format that will produce
sound through four speaker channels (front left, center,
front right, monaural surround) when a Dolby Pro Logic
Decoder is used. It is also compatible with stereo systems
but the user will only have two-channel (front left & right)
of sound.

Basic Functions

B

ASIC

F

UNCTIONS

Advertising
This manual is related to the following products: