Panasonic SC-PT875 - Manual (Page 8)

8
RQ
TX02
34
Quick Start
Gu
ide
Getting S
tarted
Basic setup example
[Note]
≥ Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
≥ Only one video connection is required. Choose one of the video connections above depending on your TV.
step 3 Connections (continued)
3 Audio and video connections
Other video connections
TV terminal
Cable required
(not included)
Main unit terminal Features
[Note]
≥ Non-HDMI-compliant cables
cannot be utilized.
≥ It is recommended that you use
Panasonic’s HDMI cable.
Recommended part number:
RP-CDHG15 (1.5 m),
RP-CDHG30 (3.0 m),
RP-CDHG50 (5.0 m), etc.
[\\\\\\\\\\\HDMI\\\\\\\\\\\] This connection provides the best picture quality.
≥ Set “VIDEO PRIORITY” to “ON” (B 28, HDMI menu).
≥ Set “VIDEO FORMAT” in Menu 5 (HDMI) (B 21).
VIERA Link “HDAVI Control”
If your Panasonic TV is VIERA Link compatible, you
can operate your TV synchronising with home theater
operations or vice versa (B 22, Using the VIERA Link
“HDAVI Control
TM ”).
≥ Make the extra audio connection (B above) when you
use VIERA Link “HDAVI Control” function.
Panasonic TVs with 576/
50i·50p, 480/60i·60p
input terminals are
progressive compatible.
Consult the
manufacturer if you have
another brand of TV.
≥ Connect to terminals
of the same colour.
This connection provides a much purer picture than the
VIDEO OUT terminal.
To enjoy progressive video
≥ Connect to a progressive output compatible TV.
– Set “VIDEO OUT (I/P)” in VIDEO menu to
“PROGRESSIVE” and then follow the instructions
on the menu screen (B 27).
SPEAKERS
5 2 1 6
AM ANT
EXT
LOOP
LOOP ANT GND
4
Y
P B
P R
L
R
AV OUT
COMPONENT
VIDEO OUT
VIDEO OUT OPTICAL
IN
AUX
3
FM ANT (75 )
The illustration shows
the model for [Australia]and]N.Z.]
Main unit
Y
P B
P R
COMPONENT
VIDEO OUT
VIDEO OUT
AUX
L
R
You can enjoy the audio from your
TV, cable or satellite STB, or your
VCR through this home theater
system by connecting to the AUX
terminal.
Select “AUX” as the source (B 14).
Refer to the operating instructions for the TV, cable or satellite
STB, or VCR for the settings necessary to output its audio from
the AUDIO OUT terminal to your home theater system.
Audio cable
(not included)
Set top box (STB) or VCR
(not included)
To your cable TV
service or TV antenna
RF cable (not included)
TV (not included)
Video cable
(included)
Main unit
AV IN
HDMI cable
AV OUT
COMPONENT
VIDEO IN
P R
P B
Y
Video cables
Y
P B
P R
COMPONENT
VIDEO OUT
[COMPONENT\VIDEO]
RQTX0234-B_eng.book Page 8 Thursday, February 5, 2009 10:42 AM