Panasonic KX-TCD735ALM - Manual (Page 99)

99
Chapter 6
Multi-Unit User Operations
Transferring a Call from One Handset to Another
The intercom can be used during a call, enabling you to transfer a call between handsets registered to
the same base unit.
To transfer a call using the
intercom
Ex. Handset 1 is transferring a call to
Handset 2.
1 Handset 1:
During a call, press (INT).
Then enter the desired handset number.
•
The call is put on hold.
•
You will hear an internal ring back tone
until the other handset is answered.
•
If there is no answer, press (INT) to
return to the call.
2 Handset 2:
When the unit rings, press
to
answer.
3 Transferring a call:
Handset 1:
Press .
•
The transfer is completed.
Handset 2 can answer the call.
OR
Ending the intercom:
Handset 1:
Press (INT).
•
Handset 1 returns to the call.
To transfer a call without using
the intercom
This feature enables you to transfer the call to
another handset without waiting for the paged
handset to answer.
Ex. Handset 1 is transferring a call to
Handset 2.
1 Handset 1:
During a call, press (INT) and enter the
desired handset number. Then press
to transfer the call.
•
The call is put on hold.
2 Handset 2:
When the unit rings, press
to
answer the call.
•
The transfer is completed.
•
If the paged handset is not answered within
30 seconds, a ring tone sounds at the paging
handset. The paging handset can return to the
call by pressing
.
KX-TCD735ALM(E)-4(76~100) 2002.06.21 5:30 PM Page 99