Philips FMU-100 - Manual (Page 13)

User Manual Page 13
4.2.1.1 Volume control
In this section you can define what device should be used for controlling the volume.
o Line-in (sound-card)
Line-in device Choose a line-in device, i.e. the input to the sound card
where you connect to the audio out of RadioXtreme. (Eg: Line-In, Mic-In, Aux-In and
so fore).
4.2.1.2 Tuning
o Tuning range This allows you to choose either the standard or the enhanced FM
frequency range. However. RadioXtreme only support the standard range.
Standard (87 – 108 MHz)
Enhanced (60 – 160 MHz)
o Tuning step Select the ‘normal’ tuning step here.
o Fine tuning step Select the ‘fine’ tuning step here.
4.2.1.3 RadioXtreme plugin configuration
You can get some information about radio card and set LED status for recording using [Setup] button.
This launches RadioXtreme configuration dialog.