Pro-tec Automobile Alarm - Manual (Page 8)

Testing Alarm
Close ALL doors and press button #1 once.
1. Trailer lights should flash once.
2. Alarm in now armed.
3.
Open side door
a.
Running lights are flashing.
b. Siren is sounding.
c. Brakes are engaged.
d. Optional Pager will sound.*
e. Press Button #1 once to silence siren.
Note: Alarm is still armed.
f. Press button #1 again to disarm alarm.
g. Trailer lights will flash at least twice.
Repeat above sequence to test all doors.
4.Setting sensitivity on Shock Sensor
a. Turn set screw to halfway point.
b. Place 2X4s a few feet in front of the tow
vehicle wheels and tow trailer over 2X4s.
Further adjustment might be necessary according
to your environment.
*Pro-Tec System One Plus only.