Philips PREMIERE DCR 2021 - Manual (Page 35)

82
EN
• TV Audio: select Stereo or Mono depending the
audio output format of your TV
• VCR Audio: select Stereo or Mono depending
the audio output format of your VCR
• Default Volume: indicate the volume level to be
set as default at turn-on.
2 Press OK to confirm.
10.5.3 Time Settings
This screen is used to set the local time offset with
respect to actual local time retrieved from the network.
The offset setting is updated automatically.
1 Select the appropriate Time Offset with respect to
GMT time.
2 Press OK to confirm and exit the screen, or EXIT
to exit without storing the changes.
10.5.4 Factory settings
This item is used to reset your receiver to the factory
settings.
1 Press OK to reset your receiver to the factory
settings.
2 When prompted, press the red colour key to
confirm you want to reset the receiver.
10.5.5 Decoder Status
The Decoder Status sub menu menu includes the
following items:
o System Information
o Software Upgrade
10.5.5.1 System Information
This screen is used to display information about your
receiver, including the Serial Number and software version.
You can also access this screen via the PREMIERE menu.
10.5.5.2 Decoder Upgrade
This item is used for software upgrades. Select it to
check the current software version as well as launch a
search for new software. After a few seconds, the
Software Upgrade screen indicates whether new
software is available.
- Press EXIT to exit the screen in case no new
software is available.
DCR 2021_Premiere_indice 1b 7/03/06 11:45 Page 82