Panasonic PT-D5000U - Manual (Page 22)

Basic O
p
eration
Remote control operation
E
NGLISH - 22
You can use the remote control to switch
the signals that are being input and
projected.
If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode is
available that allows the user to hide images temporarily.
 Press the SHUTTER button to block the projected light by the internal shutter, and press again to resume.
Press the ON SCREEN button to clear the on-screen menus to avoid disrupting the program.
 Press the ON SCREEN button again to displays
You can toggle through an appropriate set of aspect ratios for a given input signal. The setting will change each time the
ASPECT
button is pressed.
 Appearance sample
S-VIDEO signal
 VID AUTO H S1 AUTO H VID AUTO(PRI.) H THROUGH H 16:9 H 4:3 H H-FIT H V-FIT H HV-FIT H VID AUTO
The projector has 7 types of internal test patterns to check the condition of the set.
1. Display an input signal image.
2. Press the TEST PATTERN button.
3. Press I H to select the required test pattern.
Switching the input signal
RGB1 Switches to RGB 1 IN.
RGB2 Switches to RGB 2 IN.
DVI-D Switches to DVI-D IN.
VIDEO Switches to VIDEO IN.
S-VIDEO Switches to S-VIDEO IN.
SDI *1
*1. SDI is only for PT-DZ6710U.
Switches to SDI IN.
Stopping the projection
Clearing the on-screen menu
Changing the picture aspect ratio
NOTE:
• The appearance of setting options vary according to input signals. See ASPECT in POSITION menu of the functional instructions that is
in the provided CD-ROM.
Displaying the internal test pattern
NOTE:
• See TEST PATTERN menu of the functional instructions that is in the provided CD-ROM.