Figure 4-1 – PSC PT2000TM User Manual
Page 70
Advertising
Programming the PT2000 and Top Gun
60
PT2000 & Top Gun PDTs
Figure 4-1: The PSC Portable Programmer (PERCPROG) Main Window
3.
From the menu, select
Options > Settings
. The
Communications
Settings
window will open (refer to
Figure 4-2: The Communications Settings window
4.
Select the desired serial port. Then select
OK
.
5.
From the PSC
Portable Programmer
menu, select
File > Open
.
The
Program File
window will open (refer to
).
Note:
After changing the serial port setting, PERCPROG will keep
the new setting until it is changed again. Use the icons in the
PSC PAL program group (Windows 3.1) or the Start Menu
(Windows 9x) to install an application.
Advertising