Planar PR Line PR3020 - Manual (Page 24)

User’s Manual
Adjusting the Projector Level
Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the projector so that it is perpendicular to the screen.
• Be sure cables are not in the way or can cause the projector to be knocked over.
1.
To raise the level of the projector, lift the projector [A] and press the height-adjuster
button [B].
The height adjuster drops down [C].
2.
To lower the level of the projector , press the height-adjuster button and push down
on the top of the projector.
3.
To adjust the angle of the picture, turn the tilt adjuster [D] right or left until desired
angle has been achieved.
– 16 –