ProForm PFRX35391 - Manual (Page 14)

14
Inspect and tighten all parts of the PROFORM ¨ Light
Cycle regularly. The Light Cycle can be cleaned with
a soft, damp cloth. To prevent damage to the console,
keep liquids away from the console and keep the con-
sole out of direct sunlight.
TIGHTENING THE PEDALS
For best performance, the pedals must be kept prop-
erly tightened. Regularly tighten both pedals.
BATTERY REPLACEMENT
If the console does not function properly, the batteries
should be replaced. To replace the batteries, refer to
assembly step 13 on page 10.
CRANK ADJUSTMENT
If the arms of the
Crank (29)
become loose,
they should be
tightened in
order to prevent
excessive wear.
Loosen the
crank nut on the
left arm of the
Crank. Place the
end of a stan-
dard screwdriver in one of the slots in the slotted
bearing nut. Lightly tap the screwdriver with a ham-
mer to turn the slotted bearing nut counterclockwise
until the arms are no longer loose. Do not overtight-
en the slotted bearing nut. When the slotted bearing
nut is properly tightened, tighten the crank nut.
HOW TO STORE THE PROFORM ¨ LIGHT CYCLE
When the PRO-
FORM
¨ Light
Cycle is not in
use, the Seat
Frame (3) can be
adjusted to the
storage position.
First, loosen the
Lock Knob (68)
on the right side
of the Frame (1).
Slide the Seat
Frame (3) into
the Frame as far
as possible. Tighten the Lock Knob. Store the Light
Cycle indoors, away from moisture and dust.
MAINTENANCE AND STORAGE
Crank
Nut
Slotted
Bearing
Nut
29
68
3
1