Panasonic SL-SK434 - Manual (Page 6)

VOL
EQ
RANDOM RANDOM A B
MODE
ALBUM
MODE
VOL
1
4
3
2
3
01
M
Playing MP3
Starting play from an album (Album skip)
Press and hold [:] or [9] until the album you want
appears.
Album number
Number of tracks
Playing only the tracks in a selected album (Album mode)
Each time you press and hold [MODE]
≥ You can select another album with album skip ( ➪above).
≥ You cannot turn album mode on during program play.
This unit can play MP3, a method of compressing audio without overtly hurting
audio quality.
∫ When creating MP3 files to play on this unit
Disc formats: ISO9660 level 1 and level 2 (except for extended formats)
∫ Limitations on MP3
≥ This unit is compatible with multi-session but if there are a lot of sessions it
takes more time for play to start. Keep the number of sessions to a minimum to
avoid this.
≥ This unit cannot play files recorded using packet write.
≥ If a CD-ROM format CD contains MP3 and files other than MP3, only the MP3
files will be playable.
≥ Depending on how you create MP3 files, they may not play in the order you
numbered them or may not play at all.
001track.mp3
002track.mp3
003track.MP3
001album
CD-ROM drive
1
001track.mp3
Up to 30 characters
Prefix with 3-digit numbers in the order you want to play
Naming tracks and albums
Extension
(or.MP3)
002album
004track.mp3
005track.mp3 2
004album
008track.MP3
009track.MP3
003album
006track.mp3
007track.MP3 4
3
Other Play Methods
Program Play Play modes
Track number
Sequence
number
While stopped, press [:] or
[9] to select the track.
You can skip albums when
programming MP3 tracks (
➪below).
Press [MEMO] to register.
Press [1/;] to start play.
Repeat steps 1 and 2 to
register up to 20 tracks.
∫ To cancel program play
∫ Press [∫].
∫ To confirm the contents
of the program
∫ Press [MEMO] while the disc is
playing.
Changing the sound quality
When Playing MP3
Sequence
number
Album number
Track number
Each time you press [EQ]
Boosts the
bass Concert hall-
like sound
Each time you press [MODE]
One track
repeat
All track
repeat
Random Random repeat
≥ The effect may differ between different kinds of music.
≥ You cannot select “RANDOM”and “A`B” while playing MP3.
01
M
ALBUM
3
TRACK
1
M
No display (canceled)
Anti-Skip System
This system reduces skipping caused by vibration to a minimum.
You can change the anti-skip memory time for CD-DA to improve sound quality.
While stopped, each time you press and hold [MEMO]
Sound enhanced mode,
10-second anti-skip memory
Anti-skip enhanced mode,
45-second anti-skip memory
MEMO
If you created an album such as 004album on
the left, the files may not play in name order.
The albums would play in the order 1, 2,
3, 4.
Changing the remote control operation tone
Each time you press and hold [EQ]
Album mode
RQT7652
bP oFF
VOL
bP on
Tone off
Main unit
No display (canceled)
Main unit
Main unit
Main unit
ALBUM
3
TRACK
10
Main unit
6
No display
(canceled)
≥ You cannot change the memory time for MP3. It is a maximum of 100 seconds
for data recorded at 128 kbps.
Enhanced
S-XBS
or
While paused
During play
AB repeat (AB specified
segment repeat) ( ➪below)
Tone on
Enjoying even more natural sound (Digital Re-master)
You can regenerate signal frequency lost during compression, restoring to near
pre-compression form.
While stopped, each time you press and hold [MEMO]
Sound enhanced Conserves battery life
No display (canceled)
Main unit
MEMO
∫ Specifying the AB segment
Press [MEMO] at the start point (A) and once more at the end point (B).
≥ Stop or skip ( ➪page 5) to cancel.
≥ If you do not specify point B and reach the end of disc, point B is set
automatically and repeat begins. You can also specify point B again by pressing
[MEMO].