Panasonic X70 - Manual (Page 54)

55
Se
ttings
Settings
M
e
n
u
> Se
tt
in
g
s > Se
cu
ri
ty
Enabling and disabling PIN and PIN2
The PIN protects your phone against unauthorised use. If you enable the PIN, you have
to enter it every time you turn on the phone.
You need PIN2 to set fixed dial numbers.
Your PIN and PIN2 are supplied by your service provider.

Select PIN or PIN2.

Select Enable/Disable.

Select On or Off.

Enter the PIN or PIN2.
Changing the PIN
You can change the PIN to an eight figure number that you find easy to remember.

Select PIN.

Select Change.

Enter the PIN.

Enter the new PIN.

Verify the new PIN.
Note: If you enter the PIN or PIN2 incorrectly three times, the phone will lock and you
will need to enter the PUK or PUK2 code. If you enter the PUK or PUK2 code
incorrectly ten times, your phone will no longer operate. All information stored in
the SIM will be lost, and you will need to replace the SIM. Contact your service
provider for the PUK and PUK2 codes. Contact your service provider for more
details.
Note: You can only change the PIN when it is enabled.