Panasonic TC-32LZ800 - Manual (Page 7)

7
Quick Start
Guide
Accessories/Optional Accessory
A
B
A A
Preparation for Wall-hanging
Before mounting the TV on the wall, you must remove the TV-Stand from the TV.
Follow the steps below:
WARNING
Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer mount the unit will void your unit’s warranty.
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and product damage.
Do not mount this LCD Television directly below ceiling lights (such as spotlights, floodlights, or halogen lights)
which typically give off high heat. Doing so may warp or damage plastic cabinet parts.
Location
Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including
reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent an internal component failure. Keep away from areas of excessive heat
or moisture.
a
b
15°
15°
TC-32LZ800
a: 16.1 ” (408 mm)
b: 12.0 ” (304 mm)
TC-37LZ800
a: 18.3 ” (464 mm)
b: 15.0 ” (381 mm)
Adjust the LCD panel
to your desired angle. When this hole is aligned
with the center of the
groove, the pedestal
will be positioned at the
center of its rotation.
(View from above)
Note
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
A Remove four screws
B Pull out the TV-Stand
Foam mat or thick
soft cloth
Disconnect all the cables from the TV.
1
Remove the TV-Stand.
2
Antenna terminal Pin terminals HDMI terminal
green blue red
green
Firmly tighten by hand. Match colors of plugs and terminals.
Insert firmly. Insert firmly.
Reference of connection
TC-32LZ800 TC-37LZ800