Philips AV-HS300G - Manual (Page 26)

6
2. Basic operations
2-7. Preset memory
Up to 10 panel settings can be stored in this memory.
The table below lists the settings which are stored.
<Table of stored preset memory>
Item Description of setting Initial value (factory default)
Crosspoint A bus 1
B bus 1
KEY-S 1
KEY-F 1
AUX bus 1
Color background WHITE
Wipe Wipe pattern 4 (center)
Border width 0
Soft effect width 0
Border color WHT
Transition area BKGD/KEY selection BKGD
MIX/WIPE selection MIX
Auto transition time (BKGD) 30F
Auto transition time (KEY) 30F
Key Key type (TYPE) LIN
Key adjustment (ADJ) GAIN: 100
CLIP: 0
DENS: 100
Invert ON/OFF OFF
Fill color BLE
Edge color YLW
Edge ON/OFF (TYPE) OFF
Edge width 
User color User color 1 (HUE, SAT, LUM) 0, 0, 100
User color  (HUE, SAT, LUM) 355, 100, 7
User color 3 (HUE, SAT, LUM) 50, 100, 9
User color 4 (HUE, SAT, LUM) 0, 0, 0
 The data stored in the preset memory will not be initialized even when initializing is performed.
STORE: This is used to store the panel settings in the preset memory.
1 Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu.
The PSMEM (1/3) menu appears first.
2 Turn [F], select “STOR” using the MODE item, turn [F3], and set the preset memory number using the NO.
item.
3 Press the [F4] switch (EXEC) to store the settings.
‰ 3&$-

$-3
14.&.



.0%&
4503
/0



 &9&$
An asterisk ( ) appears at the left of the number when data has been saved in the preset memory.