Symptom problem solution – Polaroid PDC 310 User Manual

Page 30

Advertising
background image

30

Polaroid PDC 310 Digital Camera User Guide

www.polaroid-digital.com

31

Polaroid PDC 310 Digital Camera User Guide
www.polaroid-digital.com

For Macintosh® Users

MAC

I receive an error message

when I am installing the

Polaroid PDC 310 Digital

Camera.

Polaroid PDC 310 Digital

Camera does not load.

Shut down all other applications

and attempt to re-install the driver,

or download the updated driver

from

www.polaroid-digital.com

and install the updated driver.

Symptom

Problem

Solution

“Polaroid PDC 310 Digital

Camera” plug-in file and

Polaroid PDC 310 Digital

Camera” folder is not

found in the Programs

menu

after

I

have

installed the driver.

The installer for the

Polaroid PDC 310 Digital

Camera requires the PDC

310 be connected to the

Mac (via the USB) after the

software has been installed

& the Mac restarted.

Install the software, restart your

Mac, and finally, connect the PDC

310 to the Mac via the USB port,

then the plug-in file and folder will

appear in the Hard disk.

All the images I have

taken do not appear on

the PDC 310.

You have lost power to your PDC 310 by either:
Insufficient battery power

Upload all images to your Mac as

soon as possible. (please refer

to Battery Guidance section in

User’s Manual.)

Removing the battery

without being connected

to your Mac (turned on)

via the USB cable.

If you need to change batteries, and

retain the images in your PDC 310’s

memory, ensure you are connected

to a Mac which is turned on via the

USB cable, which will then draw

power from the Mac whilst you

insert new batteries.

I cannot upload images to

the Mac

Connection failure

Check all cables connections are

secured.

LCD display is flashing.

Battery power is too low to

continue taking images.

Upload saved images immediately,

then replace battery.

I cannot run the Polaroid

PDC 310 Digital Camera.

Conflict

with

another

camera driver capture

device.

If you have any other camera

installed on your computer,

remove the camera and it’s driver

completely from your system

to avoid conflict with another

camera or capture device.

I hear a low “beep” when

trying to take an image.

Insufficient light.

Take your images in sufficient

light condition.
Check your lens cover is open.

I cannot access any Arcsoft

Funhouse’s templates.

No CD in CD-ROM drive.

Put Polaroid CD into the CD-ROM

drive.

Advertising