Panasonic KX-PW55CL - Manual (Page 7)

7
1
Open the Control panel by pressing
down the Control panel open button.
2
Open the Inner cover by sliding
down the Inner cover open lever.
3
Put the Thermal paper to the Paper
holder by spreading the Paper holder.
4
Put the Paper holder in the set position
of the Main unit.
5
Insert the Thermal paper to the slit of
Inner cover.
7
Close the Control panel
6
Make sure that mark point on the
Release gear is correct, and then close
the Inner cover and pull out the Thermal
paper (approx. 5cm) through the outlet
for recording paper.
Installing the Thermal paper
Control panel
Press down
Inner cover
lnner cover
open lever
Paper holder
Correct
Slack
Incorrect
Right side Left side
Thermal paper
If the thermal paper has a slack, tighten it by
winding.
Left side
Paper holder
Set position
Right side
Slit
Thermal paper
Outlet
Inner cover
Mark on the lnner cover
Mark on the
release gear
Click