Pioneer AVH-P5900D - Manual (Page 53)

2 Touch BAND to select an XM band.
Touch BAND repeatedly until the desired XM
band is displayed, XM1, XM2 or XM3.
# To switch between groups of touch panel keys,
touch
NEXT or PREV.
3 Touch c or d to select a desired
channel.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
# If you touch and hold c or d, you can in-
crease or decrease the channel number con-
tinuously.
# You can also select a channel by pressing o
or p.
# You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on this page.)
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
! Up to 18 stations, six for each of three XM
bands can be stored in memory.
1 Select the channel that you want to
store in memory.
2 Touch LIST to display the preset list.
3 Touch and hold a preset tuning key
P1 (PRESET1) to P6 (PRESET6) until the beep
sounds.
The selected station has been stored in mem-
ory.
The next time you touch the same preset tun-
ing key
P1 (PRESET1) to P6 (PRESET6) the sta-
tion is recalled from memory.
4 Touch ESC to return to the ordinary dis-
play.
Note
You can also use a and b to recall stations as-
signed to preset tuning keys
P1 (PRESET1) to
P6 (PRESET6) when the CH-NUMBER mode is
selected.
Switching the XM channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
% Touch MODE to select the desired chan-
nel select mode.
Touch
MODE repeatedly to switch between
the following channel select modes:
CH-NUMBER (channel number select setting)
—CATEGORY (channel category select
setting)
Selecting a channel in the channel
category
1 Touch MODE to select the channel cate-
gory select mode.
Touch
MODE repeatedly to switch between
the following channel select modes:
CH-NUMBER (channel number select setting)
—CATEGORY (channel category select
setting)
2 Touch a or b to select the desired chan-
nel category.
3 Touch c or d to select the desired chan-
nel in the selected channel category.
Available accessories
En
53
Section
04
A
vailable
accessories