Prince Castle SM-22 - Manual

Single Spindle Mixer
Model No. SMW & SM-22
355 East Kehoe Blvd.
l
Carol Stream, IL 60188
Tel: (630) 462-8800
l
Fax: (630) 462-1460
Toll Free: 1-800-PCASTLE
Printed in October 1997
Prince Castle Inc.
SMW-501
SPECIFICATION
SMW & SM-22 Dimensions
Width 4” (55.88 cm)
Depth 6” (55.88 cm)
Height 12” (58.92 cm)
Shipping Weight 12lbs. (5.44 kg.)
The Prince Castle Single Spindle Mixers are perfect
for restaurants with soft serve ice cream machines.
High and low speeds and removable cupholder make
this mixer easy-to-use and clean. These mixers
handle any size paper cup.
LIMITED WARRANTY
This product is warranted to be free from defects in
material and/or workmanship for a period of one
year from date of original installation, not to exceed
one year from date of shipment from our factory.
Any component which proves to be faulty in material
and/or workmanship will be replaced or repaired (at
the option of Prince Castle, Inc.) without cost to the
customer for parts or labor.
This warranty is subject to the following exceptions/
conditions:
l Use of any non-genuine Prince Castle parts
voids this warranty. All genuine Prince Castle
replacement spare parts are warranted for ninety
(90) days from date of purchase.
l Damage caused by carelessness, neglect, and/
or abuse (e.g., dropping, tampering or altering
parts), equipment damaged in shipment, by fire,
flood or an act of God is not covered under this
warranty.
ELECTRICAL
SMW SM-22
Wall Mounted Spinner Head
110-120 VAC 110-120 VAC
60 Hz 60 Hz
Two-speed switch & motor Two-speed switch & motor
10,000 & 15,000 RPM 10,000 & 15,000 RPM
TABLE OF CONTENTS PAGE
Installation ..................................................................... 2
Operating ....................................................................... 2
Cleaning ........................................................................ 2
Proper Maintenance ..................................................... 3
Parts List ................................................................ 3 & 4
OPERATING
INSTRUCTIONS