Philips BQ04022 - Manual (Page 12)

12
STEP 8
8-1 Repeat step 7-1 to place and attach Side Shelf Assembly (4) to the Cabinet and Firebox Assembly as
shown. Ensure the inside edge of the Side Shelf Assembly (4) slides down between the firebox and
cabinet legs.
And then use 1 bolt (D) to attach the Side Shelf to the right side of the Main Burner Control
Panel.
STEP 7
7-1 Attach the Side Burner (3) to the Cabinet and Firebox Assembly using 4 Philips Head Bolts (A) and 4
Spring washer (E) going from the inside of the Firebox and into the Side Burner Assembly as shown in
Insert 1. Continue to attach the Side Burner Assembly (3) to Cabinet and Firebox Assembly using 4
Philips Head Bolts (B) and 4 Lock Washers (E) going from underneath the Side Burner Assembly and
into the Cabinet legs. And then use 1 bolts (D) to attach the Side Burner to the left side of the Main
Burner Control Panel, also the Manual Igniter (11.A) was secured by the bolts (D).
E
B
D
E
3
4
11.A