Pioneer VSX-819H - Manual (Page 25)

Connecting up 03
25
En
English
Français
Deutsch
Nederlands
Italiano
Español
• If the surround speakers cannot be set
directly to the side of the listening position
with a 7.1-channel system, the surround
effect can be enhanced by turning off the
UP Mix function (see Setting the Up Mix
function on page 37).
• Try not to place the surround speakers
farther away from the listening position
than the front and center speakers. Doing
so can weaken the surround sound effect.
Caution
• Make sure that all speakers are securely
installed. This not only improves sound
quality, but also reduces the risk of
damage or injury resulting from speakers
being knocked over or falling in the event of
external shocks such as earthquakes.
Switching the speaker system
Three speaker system settings are possible
using the SPEAKERS button.
• Use the SPEAKERS button on the front
panel to select a speaker system setting. 1
Press repeatedly to choose a speaker system
option:
• SP A – Sound is output from the speakers
connected to the A speaker terminals and
SURROUND BACK PRE OUT
(multichannel playback is possible).
• SP B – Sound is output from the two
speakers connected to speaker system B
(only stereo playback is possible).
• SP AB – Sound is output from speaker
system A, the two speakers in speaker
system B, and the subwoofer.
Multichannel sources are downmixed only
when the STEREO or A.L.C mode is
selected for stereo output from speaker
systems A and B.
2
• SP  – No sound is output from the
speakers but from the headphone jack.
Note
1 The subwoofer output depends on the settings you made in Speaker Setting on page 42. However, if SP B is selected above,
no sound is heard from the subwoofer (the LFE channel is not downmixed).
SPEAKERS CONTROL
MULTI-ZONE
ON/OFF SPEAKERS
2 You can use speakers with a normal impedance between 6 Ω and 16 Ω. However, be aware that only the front speakers are set
to a value between 12 Ω and 16 Ω when you select SPAB.
VSX-819H_KU.book Page 25 Thursday, December 25, 2008 8:36 AM