4 recording paper – Panasonic KX-FT904HK User Manual

Page 6

Advertising
background image

6

1. Installation and Quick Start

1.4 Recording paper

A

Open the cover by pressing the cover open
button (

1).

B

Install the recording paper.

C

Insert the leading edge of the paper into the
opening above the thermal head (

1).

D

Pull the paper out of the unit.

L

Make sure that there is no slack in the
paper roll.

E

Close the cover securely by pushing down on
both sides.

F

For KX-FT902:
Press {FAX/START}, then tear off the
excess paper by pulling it towards you.

For KX-FT904/KX-FT908:
Press {FAX/START} to cut the paper.

Correct

Incorrect

1

1

Note:

L

If the paper is secured with glue or tape,
cut approximately 15 cm from the
beginning of the roll before installing it.

L

When the power cord is connected, a
message is printed each time the cover is
opened then closed. If the recording paper
is installed upside down, the message will
not be printed. Install the paper correctly.

L

For accessory information, see page 4.

{

FAX/START}

FT-902-904-908HK.book Page 6 Tuesday, June 15, 2004 5:44 PM

Advertising
This manual is related to the following products: