Panasonic 4520 - Manual (Page 34)

34
Making Copies
Basic Menu
■ Tandem/Remote Copy Settings (Registration 1)
Input the Key Operator ID Code if required.
Input ID Code
(4-digit)
Enter the key name ∗
(up to 15 characters).
∗ By default, the key name will
be up to 15 characters of the
station’s name.
■ Tandem/Remote Copy Settings (Registration 2)
If installing the machine on a Network
with a different subnet mask, you must
first register it before being able to use
the Tandem/Remote Copying function.
Scroll to
05/05
IP Address ∗
Ex: 123.123.12.1
When entering a 1 or 2-digit number
segment, add “00” or “0” in front of the
number, to scroll to the next segment of
numbers or press the “ “ key to enter a
period after the number.
■ Tandem/Remote Copy Settings (Editing)
To edit the registered machine’s settings
(IP Address, machine name or key name).
Open the screen
05/05 same as
the Registration
procedures above.
■ Tandem/Remote Copy Settings (Deleting)
To delete the registered machine.
Open the screen
05/05, same as
the Registration
procedures above.
1
4
7
1 2
5 6
1 2
1 2