Panasonic 4520 - Manual (Page 56)

56
Making Copies
Other Features
■ Concurrent Copying
The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional Hard Disk Drive (See page
75) to be installed)
1st job
1st job
2nd job
Reserve
Copy
2nd job
1st job
or Select Function
■ Energy Saver (Power Save Mode, Sleep/Shutdown Mode)
■ Skyshot Mode
Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened.
Two types of Skyshot modes can be selected:
1) Digital Skyshot Mode : The scanning area (size) is not pre-determined.
2) Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in advance.
Digital Skyshot Mode
The Digital Skyshot has 2 modes
(
copy or copy ).
The default setting of Digital Skyshot Mode is
“Freeshp”.
Before using this mode, select each setting by
using the Function setting.
No : None
Freeshp (Free shape) : Copy is made with a slant. copy
Parallel : Copy is made in a straight line. copy
(within 5 degrees)
(See page 61)
Set original on
Platen Glass
Number of Copies
(Max. 999)
NOTE ∗ Sleep Mode/Shutdown Mode and timer setup is performed in the key operator mode.
(See page 64)
● An incorrect exposure may occur when there is a black line at the edge of the original or an
image which the copier interprets as a black pattern in the skyshot mode.
These modes save power while the copier is not in use.
Power Save Mode
Enter
Sleep/Shutdown Mode∗
Automatically enters the Sleep/
Shutdown Mode after 15 minutes
from the last copy job.
To clear
or
1
2
1 2
2 1
● Power Consumption and Warm Up Time while in the Power Save
Mode or Sleep/Shutdown Mode, refer to page 86.
● The machine will not go into Sleep/Shutdown Mode when the Weekly
Timer is selected.
Indicator
Flash: Power Save Mode
Light: Sleep/Shutdown Mode