Philips HTS5506/F8 - Manual (Page 49)

EN - 49
EN
12.8. Restore Default Settings
Menus to reset player settings, format USB storage device,
local storage and clear network settings.
1. Use [
] to select “Setup” in the home
menu, then press [OK].
2. Use [ ] to select “Advanced Setup”, then press
[OK].
3. Use [ ] to select “Restore default settings”, then
press [OK].
4. Use [ ] to select the desired setting, then press
[OK].
“Reset Settings”:
All the settings except for the “Parental Control” and
“Network Installation” setting will be reset to default.
“Format USB” (Available only when a USB
storage device is connected):
Initialize the USB storage device.
“(Unit) Erase Saved BD-ROM Data”:
Clears the data saved for the BD-ROM contents, such
as BD-ROM game scores, on this player.
“(USB) Erase Saved BD-ROM Data” (Available
only when a USB storage device is connected):
Clears the supplemental data for the BD-ROM
playback, such as subtitle data, from the USB storage
device.
“Reset Network Settings”:
Reset the network setting to the default.
5. Use [ ] to select “Yes”, then press [OK].
• Confirmation message will appear. Press [OK] to
complete the setting.
6. Press [ (home)] to exit.
C Caution
• Do not remove the USB storage device while executing
the “Format USB” or “(USB) Erase Saved BD-ROM
Data”. It will damage the USB storage device.
D Note
• “Format USB” and “(USB) Erase Saved BD-ROM Data”
are not available when a Blu-ray Disc™ is in the unit.
(home) A “Setup” A
“Advanced
Setup”
A
“Restore default
settings”