Philips HTS5506/F8 - Manual (Page 51)

EN - 51
EN
14. OTHER SETTINGS
14.1. Switching Active Source Mode
You can change the active source mode to the desired
external audio inputs and enjoy audio from the connected
device with the multi-channel surround sound capabilities.
Press [SOURCE] repeatedly to select the desired source
mode.
“Aux1”:
Set the active source mode to the AUDIO IN(AUX1).
“Aux2”:
Set the active source mode to the AUDIO IN(AUX2).
“Coaxial”:
Set the active source mode to the DIGITAL AUDIO IN
(COAXIAL).
“FM”:
Set the active source mode to the FM.
“HDMI-ARC”:
Set the active source mode to the HDMI-ARC.
14.2. Sleep Timer
The sleep timer enables the unit to switch to the standby
mode automatically after the selected preset time.
To set the sleep timer:
Press [SLEEP] repeatedly to select the desired
preset time.
“SLP¬Off”:
Turns off the sleep timer.
“SLP 15min.”:
Set the preset turn-off time to 15 minutes.
“SLP 30min.”:
Set the preset turn-off time to 30 minutes.
“SLP 60min.”:
Set the preset turn-off time to 60 minutes.
“SLP 90min.”:
Set the preset turn-off time to 90 minutes.
“SLP 120min.”:
Set the preset turn-off time to 120 minutes.
“SLP 150min.”:
Set the preset turn-off time to 150 minutes.
To check or change the setting:
Press [SLEEP] once to display the remaining time.
To change the setting, press [SLEEP] repeatedly until
your desired preset time is displayed.
To cancel sleep timer:
Press [SLEEP] repeatedly until “SLP¬Off” is displayed.
D Note
• The sleep timer will be activated even if the unit is in
operation.
• Pressing [SLEEP] does not work while the setup
menu is displayed.