Philips 6900LC - Manual (Page 14)

14
ENGLISH
C
2 Press the Razor Head Release Button ( 1)
and remove Razor Head Assembly from
the razor unit ( 2).
C
3 Brush the inside of the razor housing.
4 Turn Razor Head Assembly over so that
underside is exposed.
C
5 Turn wheel of frame counterclockwise.
6 Remove the frame and brush clean.
C
7 Remove and clean one cutter and comb at
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
8 Separate the cutter from the comb.
C
9 Only brush the cutter in an upward motion.
Use the short bristled side of the brush.
09_6940LC_6900LC.indd 14 8/12/09 10:00:36 AM